Quick Details
Product Name
|
Sand Fillters
|
Brand Name
|
-
|
Place of Origin
|
-
|
Delivery time
|
-
|
Specifications
Product Description
Our company supplies different types of filter used for industrial and potable water supply. The filters are being used in potable and advance waste water treatment plant and other industries.•The filters are economically fabricated using optimum design parameters in accordance with ASME /BS standards.
•Slow and rapid filtration rate is being implemented depending on the application.
•Filters are fully shop assembled and skid mounted
•Filters operation can be automatic and manual.
•Vertical filters are designed using capacity up to 92m3/hr.
•Air scouring is an option used depending on type of media and raw water and filter application.
•Filters with higher capacity will be custom built & design.
Application:
Dual Media Sand Filter / Spruce Media
This filter is used to remove turbidity and suspended solids from raw water. Media implemented is Silica Sand & Anthracite with standard filtration rate of 10-13m³/hr/m² and with spruce Media Filtration rate are 30-40-m3/hr/m2
Iron/Manganese Removal Filter
This filter is used to remove iron and manganese from the raw water with different feed water pH at standard filtration rate of 10-12m³/hr/m².
Activated Carbon Filter
This filter is specially designed for the absorption of soluble organic impurities found in water. Also to remove odour taste & colour.
Tertiary Filtration
It is used in waste water treatment plant to reduce BOD and suspended solids down to 5-10 mg/lt.
Polishing Filter
It is used to reduce suspended solids to below 5 microns
Silica Sand Filter
Silica sand filter, also known as mechanical filter, is a kind of water filtration equipment mainly used to remove the granular impurities, suspended solids, colloids, and other substances in water.
It adopts silica sand as the filler. Its filtration medium can be one or more substances among silica sand, anthracite, granular porous ceramics and manganese sand. The height of filtering material layer is more than 1200mm. The filtering material granularity and height should be in conformity with relevant technical requirements.
Under normal temperature and a certain pressure, through the flocculation, absorption and interception of filtration media, impurities in original solution is wiped out and the SDI of filtered water is greatly reduced.